Does your kitchen conform to the most recent Gas Regulations?

All new kitchens must have interlocking on the ventilation framework to conform to BS 6173 (2009) and GSIUR 27(4).

Any kitchen assembled after September 2001 must have interlocking on the ventilation framework to follow BS 6173 and GSIUR 27(4).

In the event that an establishment originating before September 2001 does not have an interlock fitted, the establishment must be evaluated by the gas designer to make whether an inadmissible danger is prone to emerge. In the event that there is a plausibility that the gas could be devoured without satisfactory ventilation to guarantee the wellbeing of faculty, this would be an unsatisfactory danger.

Any current apparatuses that are altered or kept up or supplanted may additionally require the ventilation framework to be interlocked. (See Gas Safe Technical Bulletin TB 130)

What is an interlock?

Reason gave security gadget or framework to keep the supply of gas to machines if the mechanical ventilation framework is not working at a foreordained level

Why is an interlock needed?

An interlock is obliged to guarantee the security and solace of the kitchen staff. In the event that the ventilation framework is not working accurately, gasses including carbon monoxide and nitrogen dioxide can develop to hazardous levels. These two gasses give most concern to the Health and Safety Executive (HSE).

How does the interlock function?

A sensor must recognize a wind current over a foreordained level. At exactly that point can the gas reset catch on the board be reset, opening the gas separation valve and turning the gas on.

In the event that the wind current is excessively low, the gas disengagement valve CANNOT open.

In the event that the wind current is turned off the gas disengagement valve will close.

The essential point here is that it is not sufficient just to have a ventilation framework, however that it should really be working effectively for the gourmet specialist and kitchen staff to be protected from harmful gasses which are discharged into the air when gas is copied.

The dangers of not consenting to the regulations incorporate the accompanying;

1. Dangers to the strength of representatives.

2. Protection ramifications of a case by a harmed individual or due to a related mischance.

3. A Gas Safe enrolled installer may issue an At Risk or Immediately Dangerous endorsement which could close the kitchen and unfavorably influence exchange.

4. In the occasion of an episode, a Health and Safety Executive (HSE ) examination may be prompted.

5. A fine of up to £5,000.00 and referral to Crown court.5. A fine of up to £5,000.00 and referral to Crown court.

6. In the occasion of death brought on by carelessness, a charge of homicide could emerge under existing enactment.

What is a Flame Failure Device?

This is a gadget fitted to a gas apparatus burner that will turn off the gas to the burner if the fire goes out. This framework forestalls unintentional getaways of gas. These are fitted as standard to all burners on all cooking gear with a CE mark.

Generally just old supplies over around 10 years of age does not have fire supervision fitted to all burners.

What is a Gas Proving System?

A gas demonstrating framework forestalls conceivably hazardous circumstances happening by keeping the gas supply from being turned on until all apparatus disengagement valves are shut. This anticipates unintentional getaways of gas.

Do I need a Gas Proving System?

You must have a gas demonstrating framework if any of your apparatuses DO NOT have fire supervision fitted.

On the off chance that gas is restored to a machine with no fire supervision fitted when the separation valve is open a departure of gas will happen. This is a hazardous circumstance.

A gas demonstrating framework keeps this perilous circumstance happening by keeping the gas supply from being reestablished until all apparatus seclusion valves are shut.

How does a Gas Proving System work?

a) First the fans must be running. (See board "Fans On/ Off" Indicators)

b) Operate the gas force key-switch.

c) Depress the "Begin Gas Proving" Button.

d) IF the gas framework is protected, the principle gas valve will open and the board will show "Gas On"

Else the "Gas Off" marker will stay lit, as a machine valve is still open or a gas break exists.

What current screen do I need?

The scope of the current screen must be matched to the most extreme present of the fan engine, i.e.

In the event that the fan engine has a greatest current rating of 1 Amp utilize a 0.2amp – 2 Amp current screen

In the event that the fan engine has a greatest current rating of four Amps utilize a 0.5amp – 5 Amp current screen

In the event that the fan engine has a greatest current rating of seven Amps utilize a 0.8amp – 8 Amp current screen.

Current screens are accessible in the accompanying reaches;

· 0.1 Amp – 1 Amp

· 0.2 Amp – 2 Amp

· 0.5 Amp – 5 Amp

· 0.8 Amp – 8 Amp

· 1.6amp – 16 Amp

A current screen ought to be fitted as near the fan speed controller as could reasonably be expected. The current screen should not be fitted in the







service list

Commercial Catering Gas Certificates
Commercial Boliers
Commercial Heaters
Commercial Pipework Installation
LPG Gas Certificates Full Gas Installation
Interlock Systems
Breakdown repairs
24 Hour emergency call out
Gas leak trace and repairs
Gas installation safety reports  

and much more...